The Railroad Modeler Is Now Closed! Please Visit
Our New Site RAILS WEST

Wednesday, February 17, 2010

Railroad T-Shirt - Southern Pacific Cab Forward AC-12 2-8-8-4 Locomotive - Sizes Kids Small To Adult Large




Southern Pacific Railroad's AC-12 class of cab forward steam locomotives was the last class of steam locomotives ordered by Southern Pacific. They were built by Baldwin Locomotive Works during World War II, with the first, number 4275, entering service on October 27, 1943, and the last, 4294, on March 19, 1944.

SP used the AC-12s for a little over a decade with the first retirements occurring on April 5, 1955, and the last on September 24, 1958. All but one of this class, number 4294, was scrapped.

The cab forward design was widely used by the Southern Pacific Railroad, which developed it to deal with the peculiar problems of its routes. The 39 long tunnels and nearly 40 miles (64 km) of snow sheds of the Sierra Nevada Mountains could funnel dangerous exhaust fumes back into the crew compartment of a conventional locomotive. After a number of crews nearly asphyxiated, someone had the idea of running his locomotive in reverse. This meant that the tender was leading the train, which introduced new problems. The tender blocked the view ahead and put crewmen on the wrong sides of the cab for seeing signals. The tenders were not designed to be pushed at the lead of the train, which limited speeds. Southern Pacific commissioned Baldwin Locomotive Works to build a prototype cab-forward locomotive, then ordered more before the prototype had even arrived.

All of the cab-forwards were oil-burning locomotives, which meant there was little trouble involved putting the tender at what would normally be the front of the locomotive. The oil and water tanks were pressurized so that both would flow normally even on uphill grades. Visibility from the cab was superb, such that one crewman could easily survey both sides of the track. There were concerns about what would happen to the crew in the event of a collision, and at least one fatal accident occurred on the Modoc Line when a moving locomotive struck a flat car. Turning the normal locomotive arrangement around also placed the crew well ahead of the exhaust fumes, insulating them from that hazard. One problematic aspect of the design, however, was the routing of the oil lines; because the firebox was located ahead of the driving wheels (instead of behind them, the usual practice), oil leaks could cause the wheels to slip. A nuisance under most conditions, it resulted in at least one fatal accident. This occurred in 1941 when a cab-forward with leaking steam and oil lines entered the tunnel at Santa Susana Pass near Los Angeles. The tunnel was on a grade, and as the slow-moving train ascended the tunnel, oil on the rails caused the wheels to slip and spin. The train slipped backwards and a coupler knuckle broke, separating the air line, causing an emergency brake application and stalling the train in a tunnel that was rapidly filling with exhaust fumes and steam. The oil dripping on the rails and ties then ignited beneath the engine cab, killing the crew.

No other North American railroad ordered cab-forward locomotives, although some, like the Western Pacific, did consider the type. Built to deal with difficult terrain, these remarkable locomotives became an easily recognizable symbol of the Southern Pacific. One example of the type, Southern Pacific 4294, is kept at the California State Railroad Museum in Sacramento, California. It is a 4-8-8-2 locomotive and is the only one to escape being scrapped.

See Other Railroad T-Shirts: Railroad T-Shirt - AT&SF (Santa Fe) Alco PA-1 - Sizes Kids Small To Adult XXXL / Railroad T-Shirt - AT&SF (Santa Fe) SD70Ms at San Francisco Peaks - Sizes Kids Small To Adult XXXL

See Also: Intermountain Railway Company HO Scale AC-12 4-8-8-2 Locomotive - Southern Pacific / Railroading On DVD! - Southern Pacific Cab Forward Collection

Other Southern Pacific Items: Athearn HO Scale SD40T-2 Locomotive - Southern Pacific/ Intermountain Railway Company HO Scale AC-12 4-8-8-2 Locomotive - Southern Pacific / Athearn HO Scale SD70M Locomotive - Southern Pacific / Athearn HO Scale AC4400 Locomotive - Southern Pacific / MTH HO Scale GS-4 4-8-4 Locomotive - Southern Pacific/ Bachmann HO Scale 4-8-4 GS-4 Locomotive - American Freedom Train #4449 / Bachmann HO Scale 4-8-4 GS-4 Locomotive - Southern Pacific (War Baby) / Athearn HO Scale C44-9W Locomotive - Southern Pacific / Athearn HO Scale GP40-2 Locomotive - Southern Pacific / Athearn HO Scale Bay Window Caboose - Southern Pacific

Railroad T-Shirt - AT&SF (Santa Fe) Alco PA-1 - Sizes Kids Small To Adult XXXL



ALCO PA refers to a family of A1A-A1A diesel locomotives built to haul passenger trains built in Schenectady, New York in the United States by a partnership of the American Locomotive Company (ALCO) and General Electric (GE) between June, 1946 and December, 1953. They were of a cab unit design, and both cab-equipped lead A unit PA and cabless booster B unit PB models were built.

The ALCO 244 V16 diesel prime mover proved to be the undoing of the PA: The engine had been rushed into production, and proved to be unreliable in service. The PA locomotives failed to capture a marketplace dominated by General Motors Electro-Motive Division and their E-units. The original Santa Fe three unit set #51L, 51A and 51B was repowered in August 1954 with EMD 16-567C engines rated at 1,750 hp (1,305 kW). This EMD repowering of the PAs was economically unfeasible and the remaining Santa Fe PAs retained their 244 engines. The later 251-series engine, a vastly improved prime mover, was not available in time for ALCO to recover the loss of reputation caused by the unreliability of the 244. By the time the ALCO 251 engine was accepted into widespread use, General Electric (which ended the partnership with ALCO in 1953) had fielded their entries into the diesel-electric locomotive market. General Electric eventually supplanted ALCO as a manufacturer of locomotives. ALCO's loss of market share led to its demise in 1969.
See Other HO Scale Santa Fe Items: Athearn HO Scale SD75M Locomotive - Santa Fe / BNSF / Athearn HO Scale F45 Locomotive - Santa Fe (Blue & Yellow Warbonnet) / Athearn HO Scale F7A/F7B Locomotives - Santa Fe / MTH HO Scale 2-10-0 Russian Decapod Locomotive - Santa Fe / Bachmann HO Scale Rail King Electric Train Set - Santa Fe / Athearn HO Scale EMD GP38-2 Locomotive - Santa Fe / Athearn HO Scale PS-2 Covered Hopper - Santa Fe / Athearn 50ft Ice Reefer Box Car - Santa Fe (Scout) / Athearn HO Scale Cupola Caboose - Santa Fe / Athearn HO Scale GP60M Locomotive - Santa Fe / Athearn Genesis F45 HO Scale Locomotive - Santa Fe / Bachmann 2-10-4 Texas HO Scale Locomotive - Santa Fe / Bachmann 4-8-4 Northern Locomotive - HO Scale - Santa Fe / Proto 2000 Diesel EMD F7A-B Set Powered - HO Scale - Santa Fe / Bachmann HO Scale FT Locomotive - Santa Fe / Walthers HO Scale F7 Locomotive - Santa Fe

Tuesday, February 16, 2010

Norfolk Southern Pumped $3.1 Billion Into Local Industries In 2009

Source: Norfolk Southern (Press Release)

Norfolk Southern Corporation participated in the location of 70 new industries and the expansion of 23 existing industries along its rail lines in 2009.

New plants and expansions represented an investment of more than $3.1 billion by Norfolk Southern customers and are expected to create 3,000 jobs in the railroad’s territory, eventually generating more than 138,500 carloads of new rail traffic annually.

Norfolk Southern assisted state and local government and economic development officials throughout 19 states in helping customers identify ideal locations for new and expanded facilities.

“The energy sector anchored our results during 2009,” said Newell Baker, assistant vice president industrial development. “Our group assisted in the location or expansion of 24 energy related facilities in 12 states across our service area. Ethanol production and distribution accounted for the lion’s share of energy projects, with 11 new and expanded facilities that began to receive NS rail service in 2009.”

The balance of other projects secured during 2009 was distributed among several of the broad product areas Norfolk Southern serves.

Norfolk Southern works with state and local economic development authorities on projects involving site location and development of infrastructure to connect customers to its rail system and provides free and confidential plant location services, including industrial park planning, site layout, track design, and logistics assistance. During the past 10 years, Norfolk Southern’s Industrial Development Department has participated in the location or expansion of 1,084 facilities, representing an investment of $23.9 billion and creating nearly 50,000 customer jobs in the territory served by the railroad.

Norfolk Southern Corporation (NYSE: NSC) is one of the nation’s premier transportation companies. Its Norfolk Southern Railway subsidiary operates approximately 21,000 route miles in 22 states and the District of Columbia, serving every major container port in the eastern United States and providing efficient connections to western rail carriers. Norfolk Southern operates the most extensive intermodal network in the East and is North America’s largest rail carrier of metals and automotive products.

See Also: Norfolk Southern Joins U.S. Green Building Council / Norfolk Southern Launches Improved Investor Relations Site / Railroad Job Postings For December 2009

The Golden Gate Railroad Museum Gives Railfans A Chance To Run A Steam Locomotive

Source: The Golden Gate Railroad Museum (Press Release)

The Golden Gate Railroad Museum, in conjunction with the Niles Canyon Railway, is excited to announce the opportunity of a lifetime. Take a step back in time and fulfill your childhood fantasy of running a steam locomotive with our "Run-A-Steam-Locomotive" program.

The Run-A-Steam-Locomotive program will be held on Thursday, March 11, and Friday, March 12, 2010 on the Niles Canyon Railway in beautiful Niles, California. What better way to gear up for Winterail 2010?

Operations will utilize the GGRM's former Southern Pacific 4-6-2 #2472

An instructional course will be provided by the Golden Gate Railroad Museum's Chief Mechanical Officer on the safe and proper handling of a steam locomotive.

During your one hour session you will operate SP 2472 from the end of yard limits at Niles two miles into the canyon and back at 10 miles per hour.

Two people can share an operating session; Participants under 18 must be accompanied by an adult.

Proper clothing is required. We recommend a long sleeve shirt, boots and gloves.

Former Southern Pacific Club-Lounge No. 2979 will serve as the classroom and refreshment area.

Participants will receive a certificate and special recognition item.

Tickets can be purchased online at http://ral.eventbrite.com.

See Also: The Golden Gate Railroad Museum To Offer Romance On The Rails

Caltrain Addresses Recent Delays

Source: Caltrain (Press Release)

Wheelchair lift won’t retract. Signal is displaying red. Engine won’t start. Trespasser steps in path of train. No matter what the reason it has the same result: delayed trains, resulting, more importantly, in delayed customers. And Caltrain has had more than its fair share lately and it apologizes for any inconvenience its customers have experienced.

You might say, “But I was three trains behind the one that wouldn’t start” or “I was traveling in the opposite direction; what gives?” That illustrates how orchestrated and tightly connected the Caltrain service is. One train incident can cause a domino effect. If the delayed train can’t get out of the way of other trains, they too will be delayed. Also, if the train can’t get to its destination on time and “flip” to head in the opposite direction, those customers also will be late. The 90 weekday trains are operated with only 20 train sets. That means that one train sets plays an integral role in moving Caltrain’s customers.

While Caltrain has implemented a number of contingencies, such as a stand-by set of equipment and crossovers to bypass breakdowns, customers still feel the impact when the problems are bigger than the contingencies.

Caltrain staff has been conducting an evaluation of both the locomotive and passenger car fleet to identify areas of maintenance that should be enhanced to not only provide increased reliability but to provide the ride quality and comfort level the passenger expects. Caltrain staff also is working diligently with its contract operator, Amtrak, to reduce delays and refocus on preventative maintenance.

When there is a major service disruption, Caltrain’s goal is to get service restored as quickly as possible. That may entail having one train pass, or “overtake”, another train so that it can get to its destination and cover service in the other direction. It never feels good to be at a station waiting for a train, feel relieved when you see the approaching headlight, then super frustrated as the trains speeds through the station. While it’s the best way to get service back on track, it’s a disservice to Caltrain’s customers to not let them know what’s going on. To rectify that, Caltrain is committed to improving its communication with customers.

During delays, announcements will be made every 10 minutes onboard trains and at stations. The station announcements will include both public address messages as well as visual messages, if the infrastructure is in place. By mid next year, Caltrain will be offering real-time information on train status.

Caltrain will continue to work diligently on meeting your expectations for on-time service.

See Also: Caltrain Holiday Train Collects More Than 4,000 Toys / Caltrain Beats Traffic To The KPFA Crafts & Music Fair / Live Entertainment Lights Up Caltrain Holiday Train / Caltrain Gears Up For A Busy Holiday Schedule

Railroad T-Shirt - AT&SF (Santa Fe) SD70Ms at San Francisco Peaks - Sizes Kids Small To Adult XXXL





The EMD SD70 is a series of diesel-electric locomotives produced by the Electro-Motive Division of General Motors beginning in 1992. Over 4000 locomotives in this series have been produced, mostly of the SD70M and SD70MAC models. All locomotives of this series are hood units with C-C trucks. All SD70 models up to the SD70ACe and SD70M-2 have the HTCR Radial truck, rather than the HT-C truck; the self-steering radial truck was designed to allow the axles to steer in curves, reducing wear on the wheels and railhead. With the introduction of the SD70ACe and SD70M-2, in an effort to reduce cost EMD introduced a new bolsterless non-radial HTSC truck as the standard truck for these models. The radial truck, now the HTCR-4, is still an option.

The SD70M has a wide nose and a large comfort cab (officially known as the "North American Safety Cab"), allowing more crew members to ride comfortably inside of the locomotive than the older standard cab designs. There are two versions of this cab on SD70Ms, the Phase I, which was introduced on the SD60M, and is home on the SD80MAC & SD90MAC's and the Phase II, which made a return to a more boxy design a la the original 3 window SD60M cabs. Though the Phase II cab has a two piece window matching the Phase I cab windows, the lines of the nose are boxy, with a taller square midsection for more headroom. The SD70ACe/SD70M-2 line has what is considered the Phase II cab, but it is actually more so a Phase III cab, as the windows went from the teardrop design to a rectangular window. Like the SD70, the SD70M also uses DC traction motors. Starting in mid-2000, the SD70M was produced with SD45-style flared radiators allowing for the larger radiator cores needed for split-cooling (split-cooling is a feature that separates the coolant circuit for the prime mover and the circuit for the air pumps and turbocharger). There are two versions of this radiator, the older version with two (2) large radiator panels per side, and the newer style with four (4) square panels per side. This was due to the enactment of the EPA's Tier I environmental regulations. Production of the SD70M was replaced by the SD70M-2 in late 2004, as the EPA's Tier II regulations went into effect on January 1, 2005. 1,646 examples of this model locomotive were produced. SD70M models were produced with 4000 horsepower (2,980 kW) EMD Model 710 prime movers. Purchasers included CSX, New York Susquehanna & Western (part of EMDX order #946531), Norfolk Southern, Southern Pacific (now UP), and Union Pacific.

Monday, February 15, 2010

Railroad Photography - Saturday Afternoon At Oro Grande

Story & Photos By: Ken Hulsey

Many a travel book has been written about America's historic transcontinental highway, Route 66. The interstate, which at one time, traversed the country from Chicago to Los Angeles in very much the same way as the Santa Fe railroad did. Alas Route 66, and the Santa Fe, are gone, for the most part, memories of a by-gone era in American Transportation.

The highway itself, being replaced by Interstate 40, in the west, and the Santa Fe merged with the Burlington Northern.

Remnants of these items of good old Americana can still be found for those who look hard enough, as today's photo gallery will illustrate.

Back in the 1970s, Trains Magazine published a very interesting photo spread entitled, "Railroad Photographs Without Trains". I was reminded of that classic magazine piece this past weekend, when I decided to kill two birds with one stone, and combine my quest to find a Valentine's Day present for my lovely wife, with a little train watching/photography.

One of my favorite haunts for antiques, my wife and I love old stuff, is the very quaint "Antique Station" in Oro Grande, Ca. I can normally find the perfect gift for my special little lady there, and as a matter of luck, the BNSF/Union Pacific main line runs right past the shop.

Oro Grande is located on what used to be Route 66, a stretch of road that now serves as the 'back way' into Barstow from Victorville.

Now on any given day, while shopping, at least a half dozen trains will pass this location, so I figured that this would be a great spot to capture some great railroading action shots.

I parked my car and crossed the highway to the rail line and then began my wait. I waited, and I waited.


Some 30-minutes passed before I spotted my first train, two actually, a BNSF stack-train on the track closest to me, and a Union Pacific on the adjacent trackage. Both were going the same direction, south, and both were pacing each other.


As the two trains came closer, the Union Pacific train slowed, and the BNSF freight quickly overtook it. This was a big disappointment, because I had hoped to catch them both in a photograph, but as luck would have it, I could only get a good shot of the first one to me.

I captured one shot as the train passed by the Oro Grande sign, just before it passed by some set out gondola cars, then another as it passed beyond them, headed south.


As I mentioned before, remnants of the pre-BNSF days were quite evident in Oro Grande on this unusually warm February day as this old worn-out Burlington Northern logo on the side of a set out gondola illustrates.


As I waited for another train, or trains, I snapped several pics of rolling stock near the TXI Riverside Cement plant.


Old meets new. An old Burlington Northern car coupled to a BNSF car.


The afternoon proceeded on, without any sign of action, which was odd for this local, so I took photos of what was available.


I soon got bored with my wait, so I decided to get my shopping out of the way, that was the main reason that I was visiting Oro Grande this day......honestly.

Of course, while in the store, five, count em, five trains passed by. Four UP mixed trains, and another BNSF stack-train.

I didn't rush my shopping though, I take finding the perfect gift for my wife very seriously, besides, trains always pass by this local often, so I would be certain to catch some after I was done.....or so I thought.

Again I took a position beside the tracks and waited.

Cue the sound of crickets if you will.

Nothing.

Again getting restless, I staked out an excellent place for a dramatic railroad action shot, this time adjacent to the curve alongside the cement plant. From this vantage point, I could get a great shot of trains headed south or coming north.

Only one problem, none showed up.

Again feeling artistic a took a few snaps of some assembled rail and ties along the trackage.


It was beginning to get late so I headed back to my car. While on my hike back, I took a photograph of the "Derail" switch on a very old siding.


I also noticed that several of the spikes on the main-line were falling out. I thought that this may make for an interesting photograph as well.

One shot, that may have been interesting, would have been of the discarded spray-paint cans I found along the tracks, with the graffiti laden freight cars in the back-ground. Unfortunately, I couldn't line up both subjects to my satisfaction, and I didn't want to move the cans closer to the rail-cars. Knowing my luck, a CHP officer would come by at exactly that moment and think that I was tagging the hoppers.

Now, many people would think that I had a rather boring Saturday afternoon, just hanging around the train tracks, but honestly I had a ball.

Granted, not many trains came by, but I feel that I got some great photographs anyway. Plus I was able to scout out some great spots for future photographs, and you know that the next free day I get, that's where I'll be.

"Railroad Photographs Without Trains" can sometimes be as artistic as ones with them.

For me, it was a great Saturday afternoon at Oro Grande.

See Also: Railroad Photo Gallery - Santa Fe FP45 Locomotives #95 & #98 / Railroad Photo Gallery - Union Pacific GP40-2 1368 (Ex Rio Grande)
See Other HO Scale Santa Fe Items: Athearn HO Scale FP45 Locomotive - Santa Fe (Red & Silver Warbonnet) / Athearn HO Scale F45 Locomotive - Santa Fe (Blue & Yellow Warbonnet) / Athearn HO Scale F7A/F7B Locomotives - Santa Fe / MTH HO Scale 2-10-0 Russian Decapod Locomotive - Santa Fe / Bachmann HO Scale Rail King Electric Train Set - Santa Fe / Athearn HO Scale EMD GP38-2 Locomotive - Santa Fe / Athearn HO Scale PS-2 Covered Hopper - Santa Fe / Athearn 50ft Ice Reefer Box Car - Santa Fe (Scout) / Athearn HO Scale Cupola Caboose - Santa Fe / Athearn HO Scale GP60M Locomotive - Santa Fe / Athearn Genesis F45 HO Scale Locomotive - Santa Fe / Bachmann 2-10-4 Texas HO Scale Locomotive - Santa Fe / Bachmann 4-8-4 Northern Locomotive - HO Scale - Santa Fe / Proto 2000 Diesel EMD F7A-B Set Powered - HO Scale - Santa Fe / Bachmann HO Scale FT Locomotive - Santa Fe / Walthers HO Scale F7 Locomotive - Santa Fe